cat.8100v pb series miniature sized, high ripple current high reliability high ripple current load life of 5000 / 7000 hours at +105?. suited for ballast application. adapted to the rohs directive (2002/95/ec). aluminum electrolytic capacitors u 1 p 2 b 3 2 4 c 5 2 6 2 7 0 8 m 9 p 10 d 11 configuration capacitance tolerance ( 20%) rated capacitance (22f) rated voltage (160v) series name type f d p f d 5 2.0 0.5 6.3 2.5 0.5 8 3.5 0.6 10 5.0 0.6 12.5 5.0 0.6 16 7.5 0.8 18 7.5 0.8 p 0.5 15 min 4 min f d + max f d pressure relief vent ( f 6.3up) radial lead type type numbering system (example : 160v 22f) 12 size code 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 1.0 1.0 22 10.0 1.0 25 12.5 1.0 ( f d 22) 2.0 ( f d 18) 1.5 l + max sleeve ( p.e.t. ) f d 5 pb-free leadwire pb-free pet sleeve dd 6.3 ed 810 pd 12.5 ~ 18 hd 2225 rd configuration (mm) dimension table in next page. please refer to page 21, 22, 23 about the formed or taped product spec. please refer to page 3 for the minimum order quantity. specifications category temperature range rated voltage range rated capacitance range capacitance tolerance leakage current tan stability at low temperature endurance shelf life marking performance characteristics item 40 ~ +105? (10 ~ 50v), 25 ~ +105? (160 ~ 450v) 10 ~ 450v 0.47 ~ 3300? 20% at 120hz, 20? rated voltage (v) 10 ~ 50v 160 ~ 450v after 2 minutes' application of rated voltage, leakage current is not more than 0.01cv or 3 (?) , whichever is greater. after 2 minutes' application of rated voltage, leakage current is not more than 0.06cv+10 (?) . printed with white color letter on dark brown sleeve. after storing the capacitors under no load at 105?c for 1000 hours, and after performing voltage treatment based on jis c 5101-4 clause 4.1 at 20?, they will meet the specified value for endurance characteristics listed above. measurement frequency : 120hz capacitance change leakage current after an application of d.c. bias voltage plus the rated ripple current for 5000 hours ( 10 ? 12.5 (10 ~ 50v) : 7000 hours) at 105? the peak voltage shall not exceed the rated d.c. voltage, capacitors meet the characteristic requirements listed at right. tan within 30% of initial value (10 ~ 50v) within 20% of initial value (160 ~ 450v) initial specified value or less 300% or less of initial specified value (10 ~ 50v) 200% or less of initial specified value (160 ~ 450v) z 25? / z+20? rated voltage (v) impedance ratio zt / z20 (max.) 10 3 16 2 25 2 35 2 50 2 160 3 200 3 250 3 350 4 400 6 450 6 measurement frequency : 120hz, temperature : 20? rated voltage (v) tan (max.) 10 0.30 16 0.25 25 0.22 50 0.15 160 0.15 200 0.15 250 0.15 350 0.20 400 0.24 450 0.24 35 0.18 pb ca long life pt smaller ? please refer to page 21 about the end seal configulation.
cat.8100v 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 r47 010 2r2 3r3 4r7 100 220 330 470 101 221 331 471 102 222 332 cap.(?) v 1a 10 1c 16 1e 25 1v 35 1h 50 code dimensions 5 11 6.3 11 8 11.5 8 11.5 10 16 12.5 20 12.5 25 70 100 150 180 350 550 810 6.3 11 8 11.5 8 11.5 10 12.5 10 20 12.5 25 85 130 195 270 430 710 5 11 6.3 11 8 11.5 10 12.5 10 16 12.5 20 55 95 195 255 325 500 5 11 6.3 11 8 11.5 10 12.5 10 16 10 20 12.5 25 50 60 100 200 280 350 570 5 11 5 11 5 11 5 11 5 11 5 11 5 11 6.3 11 6.3 11 8 11.5 10 16 10 20 12.5 20 case size d l(mm) 5 10 15 20 25 30 40 55 65 100 235 295 370 rated ripple rated ripple (marms) at 105? 120hz pb series aluminum electrolytic capacitors frequency coefficient of rated ripple current v 0.47 ~ 10 0 0.75 00 22 ~ 470 0 1000 ~ 3300 0 10 ~ 820 50hz 0.85 0.95 0.60 1.00 120hz 1.00 1.00 1.00 1.20 300hz 1.10 1.03 1.20 1.40 1khz 1.20 1.05 1.60 1.55 1.65 10k ~ 50khz 100khz 1.25 1.30 1.10 1.15 1.80 2.00 10 ~ 50 160 ~ 450 cap.(?) frequency 12.5 20 12.5 20 12.5 25 16 25 18 25 18 31.5 18 35.5 18 40 22 40 22 50 25 40 25 50 300 600 300 600 350 700 500 1000 600 1200 750 1500 850 1700 950 1900 1050 2100 1150 2300 1400 2800 10 20 12.5 20 16 20 16 25 18 25 18 31.5 18 35.5 18 40 22 40 22 50 25 40 25 50 125 250 175 350 250 500 325 650 400 800 500 1000 575 1150 650 1300 750 1500 950 1900 1050 2100 10 20 12.5 25 16 25 18 25 18 31.5 18 35.5 18 40 22 40 22 50 25 40 25 50 125 250 200 400 300 600 375 750 450 900 500 1000 550 1100 600 1200 800 1600 900 1800 12.5 20 16 25 18 25 18 31.5 18 35.5 18 40 22 40 22 50 25 40 25 50 case size d l(mm) 150 300 275 550 350 700 425 850 475 950 500 1000 550 1100 700 1400 800 1600 rated ripple 2c 160 2d 200 2e 250 2v 350 2g 400 2w 450 v code : rated ripple (marms) at 105? 120hz : rated ripple (marms) at 105? 100khz : in this case, 6 will be put at 12th digit of type numbering system. 250 500 250 500 300 600 375 750 550 1100 650 1300 850 1700 950 1900 1050 2100 1150 2300 1350 2700 1500 3000 100 220 330 470 560 680 820 101 121 151 181 221 271 331 391 471 561 681 821 10 22 33 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 10 20 10 20 12.5 20 12.5 25 16 25 18 25 18 31.5 18 35.5 18 40 22 40 22 50 25 40 25 50 10 20 12.5 20 12.5 20 12.5 25 16 25 18 25 18 31.5 18 31.5 18 40 22 40 22 50 25 40 25 50 250 500 300 600 300 600 375 750 550 1100 650 1300 850 1700 950 1900 1050 2100 1150 2300 1350 2700 1500 3000 cap.(?) wider range of rating.
|
